1967 & 1968 Mercury Cougar
Under The Hood

Email Contact:  C7XR7@XCS.NET

We accept PayPal payment

HOME Outside of the Car Under The Hood Trunk Memorabilia
Electrical NOS Inside the Car Literature/Manuals Diecast


1967/1968 Autolite Distributor.
Re-Manufactured
289 / 302

I purchased this for my '67 Mercury Cougar XR7 about 20 years ago and never used it.  This should work great in your '67/'68 Mercury Cougar or Mustang 289 or 302.

If I were to use it I would replace the mechanical points with a Pertronix electronic unit.  Really nice distributor.

Includes everything you see in the photos.

$100.00
Plus shipping in the USA







Click on the Photos for a close up.
Original Power By Ford Valve covers.  This set has been cleaned and stripped ready for you to paint.
'67-'73
Cougar and Mustang

Valve covers for 289 - 302- 351W engines. These have 6 bolts to attach the valve covers.
$75.00
Plus Shipping in the USA

Click on photos for larger picture. Excludes 351 Cleveland engines, they have 8 bolts for attaching.
1967 - 1968 Bracket - A/C Compressor to Intake Manifold - Rear - Used

Used Air Compressor to Intake Manifold Rear Bracket for the 1967 Mercury Cougar or Ford Mustang

$35.00
Plus Shipping in the USA




Headlight Door Actuators -Used Pair-
Fits: 1967 - 1968 Mercury Cougar
Headlight vacuum motors.

$100.00
for the pair.
Plus shipping in the USA



Hose - Heater Valve to Heater Core - w/ A/C - Reproduction 1967 - 1968 Mercury Cougar & Mustang

Both ends have 90 degree molded ends. Attaches heater core to water heater control valve.

$25.00
shipped in the USA
 
Headlight Vacuum Hose
NOS
Still has a wax coating on the rubber.

$40.00
Plus Shipping in the USA



1967 Headlight vacuum lines.

The story.
These are part of an NOS set that I put on my '67 Cougar as part of its restoration. Lines are color coded with stripes. I'll include the splitters you see in the photos.  I removed this set a year or two later when I switched over to the Probe headlight motors.
What you see is what is included.
Click on the small photos to get a much larger photo.

Look at the photos to determine if it the same as what you have and complete or not.  I don't have a set to compare to since selling my car.

Show quality. Extremely pliable, still has some of the original wax on the rubber.


$175.00
Shipped in the USA






Click on vacuum line photos for larger picture.

One used headlight wiring harness for either side of the Mercury Cougar.

This harness is the sub-harness that connects your headlights to the under hood harness. 

The Cougar uses one per side and they are identical.

Ford part # C7WY-13076-A.

$12.00
Plus Shipping in the USA

Neutral Safety Switches
neutral safety switch for the C-4 transmission installed in 1967-68 Mercury Cougar and 1967-69 Ford Mustangs.
2 Available

$50.00 Each
Plus shipping in the USA



Headlight Vacuum Solenoid Valve - With Ground Wire. Used headlight solenoid valve for the vacuum headlight system on the Mercury Cougar and Ford Thunderbird.

I tested these before storing 30 years ago but I cannot guarantee they will work now.  If they fail for you, you may send it back to me and I will send you another or refund the purchase price.
3 1 available
$100.00 each

Plus shipping in the USA



Cap and Dipstick Assembly - Power Steering Pump
1967 - 1971 Ford power steering pump dipstick. Used until 2-8-1971.

$15.00
Plus shipping in the USA



Alternator Harness.
Not really sure of the year this belongs to.  If this is your year this is a nice original harness

Might be a '70 but I'm not certain.

$20.00
Plus shipping in the USA.



76 Ford D5ZE-8509-AA 75 76 5.0 Water Pump Pulley



$35.00 
Plus
shipping in the USA.

AC Compressor.
C7AA-2875
1967-1973
Cougar or Mustang

Compressor for air conditioning systems for Mercury Cougar and Ford Mustang. This should be professionally inspected or rebuilt and this compressor has been in storage for some time. Shipped as you see pictured here.

$40.00
Plus Shipping in the USA

It is very heavy.






1968 Air Cleaner Lid
Not certain.  I think this one is one I loaned to Jay Williams when he was at the Cougar Nats in Denver back in the 90's to put on his 69 Eliminator so he wouldn't be dinged point for not having the original cover. I'm not an expert on air cleaner lids so if you know what it goes to let me know.

$40.00
Plus shipping in the USA

Click on the Photos for a close up.
Used 289 Air Cleaner Lid for the 1967 Mercury Cougar or Ford Mustang

Identified by the wagon wheel like spokes in the stamping. 1967 Mercury Cougar and Ford Mustang with 289 engines. Additionally this lid was used for the Canadian export Cougars and Mustangs in 1968, they continued to use the open emissions system. Super nice lid.

$40.00
Plus Shipping in the USA

Click on the Photos for a close up.
Well, it says its for a 289 2 barrel.
lid base and snorkle.
No idea why I have this.
click on the photo for expanded picture.

$70.00
plus shipping in the USA



Air Cleaner Base.
No idea of application other than Ford. I usually only collected '67 or '68 parts so it is likely one of those.

$20.00
Plus shipping in the USA.


Click on the Photos for a close up.
Air Cleaner Base with snorkle.
289
Original dirt included.

$65.00
Plus shipping in the USA


Click on the Photos for a close up.
Valve Covers
without "Powered by Ford" embossed in the metal. Correct on 1967 Mercury Cougar and 1966-67 Ford Mustang with 289 engines.

$40.00
Plus Shipping in the USA


Click on the Photos for a close up.

Idler Pulley - Fixed - 289 / 302 - C7AZ-8678-C
1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang

$60.00 
Plus shipping in the USA.

D00E 10156-A
1970 1971 1972 1973 Ford Mustang Boss Mercury Cougar 302 351 ALTERNATOR BRACKET

$40.00 
Includes shipping in the USA

 

C5AE-10145-A Adjusting Arm - Alternator
1967 Mercury Cougar / 1967 Ford Mustang
Very early style which is a carryover from the 1965-66 289 alternator bracket.

$30.00 
Includes shipping in the USA

DOAA-8A617-A 
1970 Ford Mustang/Cougar 302/351 AC Idler Belt Pulley

 $40.00
 
Includes shipping in the USA

61-74 Holley (Ford) 2300 Replacement Carburetor, (2v), 320 CFM,
This carburetor was used as an aftermarket replacement carburetor to the Autolite 2100 and the Motorcraft 2100 carburetors for better fuel economy. A good core for rebuilding.
$125.00 
Plus
shipping in the USA.

Coil mounting bracket. 

Application is unknown to me. 

$7.00
plus shipping in the USA.



67-69 Cougar Hood Hinge Spring.
This one has been sand blasted and repainted. Looks great.
Also fits 1967 - 1970 Ford Mustang

$20.00
Plus shipping in the USA